Lanier JP1030 - Manual (Page 75)

63
4. Replenishing Supplies
Loading Paper on the Paper Feed Tray
The load paper indicator (
B) lights
when the paper feed tray runs out of
paper.
Replenishing Paper
AAAA
Press the
{{{{Clear/Stop}}}} key.
Note
❒ This step is necessary only if
you want to pause a print run to
replenish paper.
BBBB
Press the paper feed tray down
key.
Note
❒ The paper feed tray will lower
without the key being pressed
when the printing paper runs
out.
❒ The top sheet might remain be-
tween the feed rollers. In this
case, remove the top sheet.
CCCC
Load paper on the paper feed tray.
Note
❒ Correct paper curl before set-
ting the paper.
DDDD
Press the
{{{{Print}}}} key to resume
printing.
PinkGold-F_V4_FM.book Page 63 Tuesday, September 11, 2001 6:31 PM