Lanier JP1030 - Manual (Page 25)

Standard Printing
13
1
Standard Printing
The operations are different depend-
ing on whether you use Auto Cycle
mode or not. With this mode, the ma-
chine can process masters and make
prints at one stroke. The default set-
ting of this mode is on. You can
change the default setting. See “15.
Auto Cycle Mode” on
⇒ p.57 “User
Tools Menu”.
Reference
When you use the optional docu-
ment feeder, see p.46 “Placing
Originals in the Document Feed-
er”.
AAAA
Lift the exposure glass cover.
BBBB
Place the original face down on
the exposure glass. The original
should be aligned to the rear left
corner.
CCCC
Lower the exposure glass cover.
When Auto Cycle is on
A Make sure that Auto Cycle
mode is selected.
B Enter the number of prints
with the number keys.
ZDCH110E
PinkGold-F_V4_FM.book Page 13 Tuesday, September 11, 2001 6:31 PM