Lanier JP1030 - Manual (Page 61)

Optional Document Feeder
49
2
FFFF
Insert originals face up in the doc-
ument feeder.
Note
❒ To prevent original misfeeds,
do not place originals of differ-
ent sizes.
GGGG
If you use the optional tape dis-
penser, turn on the tape dispenser
power switch.
Note
❒ The optional tape dispenser au-
tomatically feeds out strips of
paper which separate the print-
ing groups on the paper deliv-
ery tray.
HHHH
Press the
{{{{Start}}}} key.
Printing starts automatically after
trial print is delivered.
Note
❒ If you want to check the print
image, press the
{{{{Auto Cycle}}}}
key to turn off Auto Cycle mode
before pressing the
{{{{Start}}}} key.
For details, see p.14 “When
Auto Cycle is off”.
❒ If the power switch of the op-
tional tape dispenser is turned
off or the tape dispenser is not
installed in the machine, the
group printing cycle stops after
each set is delivered. Remove
the set of prints from the paper
delivery tray and press the
{{{{Print}}}} key to start the next
group printing cycle.
ZDCH120E
TSLP013E
On
Off
PinkGold-F_V4_FM.book Page 49 Tuesday, September 11, 2001 6:31 PM