Lanier JP1030 - Manual (Page 26)

Operation
14
1
Note
❒ Up to 9999 prints can be en-
tered at one time.
❒ To change the number en-
tered, press the
{{{{Clear/Stop}}}}
key and enter the new num-
ber.
C Press the {{{{Start}}}} key.
Printing starts automatically af-
ter trial print is delivered.
Note
❒ After printing is completed,
the same number of prints is
automatically set for the next
job.
❒ To stop the machine during
the multi-print run, press the
{{{{Clear/Stop}}}} key. See p.24
“ Sto ppi ng a M ul t i-p rin t
Run”.
❒ To return the machine to the
initial condition after print-
i n g , p r e s s t h e
{{{{Cl ear
Modes/Energy Saver
}}}} key.
When Auto Cycle is off
A Make sure that Auto Cycle
mode is not selected.
B Press the {{{{Start}}}} key.
A trial print is delivered to the
paper delivery tray.
C Press the {{{{Proof}}}} key and check
the image density and the im-
age position of the proof print.
PinkGold-F_V4_FM.book Page 14 Tuesday, September 11, 2001 6:31 PM