LSI U40HVD - Manual (Page 17)

LSIU40HVD PCI to Dual Channel SCSI Host Adapter 2-1
Chapter 2
Installing the
LSIU40HVD
This chapter provides instructions on how to install the LSIU40HVD and
includes these topics:
•
Section 2.1, “Quick Installation Procedure,” page 2-1
•
Section 2.2, “Detailed Installation Procedure,” page 2-3
•
Section 2.3, “Setting Interrupts,” page 2-22
•
Section 2.4, “Completing the Installation,” page 2-23
2.1 Quick Installation Procedure
This section provides quick setup instructions for the experienced
computer user with prior host adapter installation and SCSI bus setup
experience. If you prefer more detailed guidance for installing the
LSIU40HVD, please follow the instructions in
Section 2.2, “Detailed
Installation Procedure.”
For safe and proper installation, check the user’s manual supplied with
your computer and perform the following steps.
Step 1. Ground yourself before removing the host adapter board.
Remove the LSIU40HVD from the packing and check that it is
not damaged. An example of this board is shown in
Figure 2.1 .
Step 2. Switch off and unplug the system.
Step 3. Remove the cabinet cover on your computer to access the PCI
slots.