LSI U40HVD - Manual (Page 41)

LSIU40HVD PCI to Dual Channel SCSI Host Adapter 3-1
Chapter 3
Configuring the
LSIU40HVD
This chapter discusses how to change configuration settings and
includes these topics:
•
Section 3.1, “When to Configure the LSIU40HVD,” page 3-1
•
Section 3.2, “Starting the SCSI BIOS Configuration Utility,” page 3-2
•
Section 3.3, “Exiting the SCSI BIOS Configuration Utility,” page 3-14
3.1 When to Configure the LSIU40HVD
In most cases, changing the default configuration of the host adapter is
not necessary. If a conflict does exist between device settings, or if a
need exists to optimize system performance, this Configuration Utility
provides the means to change system configurations.
The configuration settings that may be changed are discussed in
Table 3.1 . The global settings affect the host adapter and all SCSI
devices which are connected to it. The device settings affect only
individual SCSI devices.
Table 3.1 Global Default Settings
Settings for the Host Adapter and All Devices Default Settings
SCAM Support Off
1
1. Applies to BIOS version 4.09 and later.
Parity Checking Enabled
Host Adapter SCSI ID 7
Scan Order Low to High (0–Max)