LSI U40HVD - Manual (Page 22)

2-6 Installing the LSIU40HVD
Figure 2.2 Inserting the Host Adapter
Step 7. The bracket around the connectors J3 and J6 (see Figure 2.1 )
should fit where you removed the blank panel. Secure it with
the bracket screw (see
Figure 2.2 ) before making the internal
and external SCSI bus connections.
2.2.3 Connecting the SCSI Peripherals
SCSI bus connections to the LSIU40HVD inside your computer are made
with an unshielded, 68-conductor ribbon cable (see
Figure 2.3 ). One side
of this cable is marked with a color to indicate the pin-1 side. Sometimes
64-bit slots
Bracket Screw
32-bit slots