LSI U40HVD - Manual (Page 44)

3-4 Configuring the LSIU40HVD
Figure 3.1 Main Menu
Below the list of host adapters on the Main Menu display, you see eight
options. They are described in detail below. If these settings are altered,
the system will reboot after the Quit option is selected, which allows the
user to exit from the Configuration Utility.
3.2.1.1 Change Adapter Status
The change adapter status allows the user to activate or deactivate a
host adapter and all SCSI devices attached to it. When this option is
used to make a change, the change takes place after a reboot upon exit
from the utility.
Figure 3.2 is an example of the Change Status on Next Boot Menu.
Main Menu
Port
Num Irq----------Status-----------NVRAM
Level Current Next-Boot Found
LSI53C875
LSI53C875
LSI53C895 FC00
F800
F801 9
9
9 On
On
On On
Off
Off Yes
Yes
Yes
Change Adapter Status
Adapter Boot Order
Additional Adapter Configuration
Display Mode = Verbose
Mono/Color
Language
Help
Quit