LSI U40HVD - Manual (Page 21)

Detailed Installation Procedure 2-5
Figure 2.1 Hardware Connections for the LSIU40HVD
Step 6. Carefully insert the edge connector J1 (see Figure 2.1 ) of the
host adapter into the PCI slot. Make sure the edge connector
is properly engaged before pressing the board into place as
shown in
Figure 2.2 . You may notice that the components on a
PCI host adapter face the opposite way from those on other
non-PCI adapter boards you have in your system. This is
correct, and the board is keyed to go in only one way.
Channel B
68-Pin Internal
High Density
SCSI Interface
Channel A
68-Pin Internal
High Density
SCSI Interface
68-pin External
High Density
SCSI Interface
LSIU40HVD PCI Bus
Connector on Mainboard
Channel B
LED Connector
J7
Channel A
68-pin External
High Density
SCSI Interface
Channel B
J1
J5
J2
Channel A
LED Connector
J4
J3
J6