LSI U40HVD - Manual (Page 30)

2-14 Installing the LSIU40HVD
2.2.3.2 Making External SCSI Bus Connections
This section provides step-by-step instructions about making external
SCSI bus connections:
Step 1. To connect external SCSI devices to the LSIU40HVD, plug the
68-pin VHDCI connector on one end of a shielded external high
density cable (see
Figure 2.3 ) into the host adapter connector
J3 or J6 (see Figure 2.1 ).
This connector is now bracketed to the back panel of your
computer.
Figure 2.9 shows how this connection is made.
Figure 2.9 External Cable to Host Adapter