Lexmark S510 - Manual (Page 114)

The USB port on the computer and on the printer are each marked with .
Note: Do not connect the USB cable until prompted to do.
1 If the USB port at the back of the printer is covered by a sticker, then make sure to remove it.
2 Firmly plug the square end of the USB cable into the back of the printer.
3 Firmly plug the rectangular end of the USB cable into the USB port of the computer.
4 Follow the instructions on the computer screen.
How are infrastructure and ad hoc networks different?
Wireless networks can operate in one of two modes: infrastructure or ad hoc.
In infrastructure mode, all devices on a wireless network communicate with each other through an access point (wireless
router).
Networking 114