Align the printhead, Clean or deep clean the printhead nozzles, Print speed is slow – Lexmark S510 User Manual

Page 148: Remove and reinstall the printer software, Maximize computer processing speed, Add memory to the computer, Computer slows down when printing, Refresh your network connections, Close all applications not in use

Advertising
background image

M

AKE

SURE

THE

INK

CARTRIDGES

ARE

PROPERLY

INSTALLED

A

LIGN

THE

PRINTHEAD

C

LEAN

OR

D

EEP

C

LEAN

THE

PRINTHEAD

NOZZLES

Note: If these solutions do not remove the streaks or lines on the printed image, then contact technical support.

Print speed is slow

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

S

ELECT

A

LOWER

PRINT

QUALITY

FROM

THE

PRINTER

SOFTWARE

M

ANUALLY

SELECT

A

PAPER

TYPE

THAT

MATCHES

THE

TYPE

OF

PAPER

YOU

ARE

USING

R

EMOVE

AND

REINSTALL

THE

PRINTER

SOFTWARE

M

AXIMIZE

COMPUTER

PROCESSING

SPEED

Close all applications not in use.

Minimize the number and size of graphics and images in the document.

A

DD

MEMORY

TO

THE

COMPUTER

Consider upgrading the RAM.

Computer slows down when printing

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

C

HECK

THE

USB

CONNECTION

BETWEEN

THE

PRINTER

AND

COMPUTER

If your computer is connected to the printer through a USB cable, then try using a different USB cable.

R

EFRESH

YOUR

NETWORK

CONNECTIONS

1

If your computer is connected to an Ethernet or wireless network, then turn off the access point (wireless router)
and turn it back on.

2

Wait one minute for the printer and computer to reestablish the connection.

C

LOSE

ALL

APPLICATIONS

NOT

IN

USE

Temporarily close unused applications or end processes that are taking too much memory from your computer.

Troubleshooting

148

Advertising