Lexmark S510 - Manual (Page 171)

ENERGY STAR
Any Lexmark product bearing the ENERGY STAR emblem on the product or on a start-up screen is certified to comply
with Environmental Protection Agency (EPA) ENERGY STAR requirements as configured when shipped by Lexmark.
Mercury statement
This product contains mercury in the lamp (<5mg Hg). Disposal of mercury may be regulated due to environmental
considerations. For disposal or recycling information, contact your local authorities or the Electronic Industries Alliance:
www.eiae.org.
Temperature information
Ambient temperature 15 to 32C (60 to 90F)
Shipping and storage temperature -40 to 60C (-40 to 140F), 1 to 60C (34 to 140F)
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption
(Watts)
Printing The product is generating hard
‑copy output from electronic inputs.
16.6
Copy The product is generating hard
‑copy output from hard‑copy original documents. 15.9
Scan The product is scanning hard
‑copy documents.
12.4
Ready The product is waiting for a print job. 6.53
Sleep Mode The product is in a high
‑level energy‑saving mode.
3.22
Off The product is plugged into a wall outlet, but the power switch is turned off. 0.37
The power consumption levels listed in the previous table represent time-averaged measurements. Instantaneous
power draws may be substantially higher than the average.
Values are subject to change. See www.lexmark.com for current values.
Notices 171