How can i check the dial tone, How do i adjust the speaker volume on the printer – Lexmark S510 User Manual
Page 87
How can I check the dial tone?
A dial tone lets you know if the telephone line is working or if the printer is properly connected to the telephone line.
If you encounter problems sending and receiving faxes, then make sure you can hear a dial tone on the line and through
the printer.
Make sure the telephone line and the wall jack are working
1
Plug an analog telephone into the wall jack.
2
Listen for a dial tone through the telephone handset.
If you hear a dial tone, then the telephone line and the wall jack are working.
If you do not hear a dial tone, plug the analog telephone into a second wall jack, and then listen for a dial tone. If
you hear a dial tone, then the telephone line is working but the first wall jack is not working.
Make sure the printer is connected properly to the telephone line
1
While the printer is connected to a telephone line through the port on the back of the printer, plug an analog
telephone into the
port of the printer.
2
Listen for a dial tone.
If you hear a dial tone, then the telephone line is working and properly connected to the printer.
If you do not hear a dial tone through both the wall jack and the printer, then see the “Fax troubleshooting checklist”
on page 151.
How do I adjust the speaker volume on the printer?
Listen to the dial tone to check if the telephone line is working and to check if the cables and devices are connected
properly in your telephone network. If you set the printer to receive faxes manually, then make sure that you set the
ringer volume loud enough for you to hear it.
Adjusting the dialing volume
1
From the printer control panel, navigate to:
> Setup >
> Fax Setup >
> Dialing and Sending >
> Speaker Volume >
2
Press the up or down arrow buttons to select a dial volume setting, and then press
.
Adjusting the ringer volume
1
From the printer control panel, navigate to:
> Setup >
> Fax Setup >
> Ringing and Answering >
> Ringer Volume >
2
Press the up or down arrow buttons to select a ringer volume setting, and then press
.
Faxing
87