Printing on both sides of the paper (duplexing) – Lexmark S510 User Manual
Page 44
Printing on both sides of the paper (duplexing)
Printing on both sides of the paper (duplexing) automatically
Notes:
•
The automatic duplex unit supports A4
‑ and letter‑size paper. It also supports plain, premium plain, ColorLok
certified plain, heavy plain, and letterhead paper types.
•
Do not remove the page until printing is finished.
Warning—Potential Damage: Do not touch the duplex latch or latches while actively printing.
For Windows users
1
With a document open, click File > Print.
2
Click Properties, Preferences, Options, or Setup.
3
Navigate to:
Layout tab > Print on Both Sides (Duplex) area > Print on both sides
•
Click Long edge for print jobs with pages that are bound along the long edge of the page.
•
Click Short edge for print jobs with pages that are bound along the short edge of the page.
4
Click the Paper/Finishing tab, and then select a supported paper type.
5
Click OK to close any printer software dialogs.
6
Click OK or Print.
To return to single-sided printing, repeat steps 1 and 2, and then navigate to:
Layout tab > Print on Both Sides (Duplex) area > Print on one side only
For Macintosh users
1
With a document open, choose File > Page Setup.
2
From the Page Setup dialog, set the printer, paper size, and orientation.
3
Click OK.
4
From the menu bar, choose File > Print.
5
From the Printer pop
‑up menu, choose your printer.
6
From the print options pop
‑up menu, choose Quality & Media.
7
From the Paper Type pop
‑up menu, choose a supported paper type.
8
From the print options pop
‑up menu, choose Layout.
Printing
44