Saving settings – Lexmark 6500 Series User Manual
Page 39
1
5
6
2
3
4
Press
To
1
A keypad number or symbol In Copy mode or Photo Card mode: Enter the number of copies or prints you
want to make.
In Fax mode:
•
Enter fax numbers.
•
Navigate an automated answering system.
•
Select letters when creating a Speed Dial list.
•
Type numbers to enter or edit the date and time shown on the display.
2
Auto Answer
Set the printer to answer all incoming calls when the button light is on.
3
Redial / Pause
In Fax mode:
•
Display the last number dialed. Press
or
to view the last five numbers
dialed.
•
Insert a three-second pause in the number to be dialed to wait for an
outside line or get through an automated answering system. Enter a pause
only when you have already begun entering the number.
4
Phone Book
Access any of the programmed Speed Dial numbers (1–89) or Group Dial
numbers (90–99).
5
Start Color
Start a color copy, scan, fax, or photo print job, depending on which mode is
selected.
6
Start Black
Start a black-and-white copy, scan, fax, or photo print job, depending on which
mode is selected.
Saving settings
In a setting menu, an * appears next to the default setting. To change the setting:
1
From the control panel, press Settings.
2
Press
or
repeatedly until the setting you want appears.
3
Press :
•
To save most settings. An * appears next to the saved setting.
•
To select a temporary setting. An * appears next to the selected setting.
Note: The printer reverts to the default setting after two minutes of inactivity or if the printer is turned off.
The Photo Card settings will not time out after two minutes of inactivity or turning off the power but will return
to the default settings when a memory card or flash drive is removed.
39