Lexmark 6500 Series - Manual (Page 80)

Note: The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
Understanding the Photo Card menu
1 If necessary, press Photo Card, or insert a memory card or a flash drive into the printer.
2 Press or repeatedly until the menu item you want appears, and then press .
3 Press or repeatedly until the submenu item you want or the setting you want appears, and then press .
Note: Pressing selects a setting. An * appears next to the selected setting.
4 To go into additional submenus and settings, repeat steps 2 and 3 as needed.
5 If necessary, press repeatedly to return to the previous menus and make other setting selections.
6 Press Start Color or Start Black.
Menu item Action
Proof Sheet Print and then scan a proof sheet:
• for all photos on the memory card
• for the most recent 20 photos
• by date
Print Photos Print photos directly from a memory card or flash drive.
Save Photos • Save photos stored on a memory card or flash drive to the computer.
• Copy photos from a memory card to a flash drive.
Lighter/Darker Adjust brightness of printed photos.
Photo Effects 1 Apply automatic image enhancement or color effects to your photos.
Paper Setup 1, 2 Specify the size and type of the paper loaded.
Photo Size 1, 2 Specify the size photo you want.
Layout 1 Select borderless or bordered, center one photo on a page, or specify the
number of photos to print on a page.
Quality 1 Adjust the quality of printed photos.
1 Setting will return to factory default setting when a memory card or flash drive is removed.
2 Setting must be saved individually.
Saving Paper Size, Paper Type, and Photo Size settings
1 From the control panel, press Settings.
2 Press or repeatedly until Paper Setup appears.
3 Press .
4 Press or repeatedly until Paper Size appears.
5 Press .
80