Lenovo 1047 - Manual (Page 96)

• Not be a common word or a common name
• Be significantly different from your previous passwords
Setting, changing, or deleting a password
This section provides instructions on how to set, change, or delete a password.
To set, change, or delete a password, do the following:
1. Start the Setup Utility program. See “Starting the Setup Utility program” on page 76.
2. From the Setup Utility program main menu, select Security ➙ Change Supervisor Password or
Change User Password.
3. Follow the instructions on the screen to set, change, or delete a password.
Note: A password can be any combination of up to 6 (1 to 6) alphabetic and numeric characters. For
more information, see “Password considerations” on page 83.
RAID controllers
The following table lists the various utilities available to configure RAID controllers before an operating
system is installed.
Table 25. RAID utilities
RAID utilities Description Location Where to find more information
EasyStartup • For use with all
factory-supported RAID
controllers
• Automatically detects
hardware and lists
all supported RAID
configurations
• Configures one disk array
per controller using all drives
currently attached to the
controller
• Created a RAID response file
that can be used to configure
RAID controllers on similarly
configured Lenovo servers.
ThinkServer
EasyStartup DVD “Using the ThinkServer
EasyStartup program” on
page 85
LSI IR-RAID Utility Onboard 1068E SAS RAID
controller Press Ctrl+C to start “Onboard 1068E SAS RAID
controller Configuration Utility
program” on page 87
LSI MegaRAID
WebBIOS
Configuration Utility ThinkServer 8708ELP SAS RAID
adapter, ThinkServer 8708EM2
RAID Adapter, or ThinkServer
RAID 700 Adapter (9260-8i) Press Ctrl+H to start Refer to the MegaRAID SAS
Software User Guide on the
documentation DVD that came
with you server. And you can
find and install the MegaCLI
program and the MegaRAID
Storage Manager program in the
ThinkServer EasyStartup DVD
that came with your server. Insert
the DVD into the optical drive
and the files are in the \Tools And
Utilities directory.
84 ThinkServer User Guide