Lenovo 1047 - Manual (Page 98)

You will then see one or more reminders about configuring storage devices, and then you will be presented
with the Lenovo License Agreement. Read the license agreement carefully. You must agree with terms in
order to continue.
After agreeing to the license agreement, you will be given the following choices:
• Continue to the main program interface
• Use a shortcut to install an operating system based a response file that you previously created using the
EasyStartup program
• Use a shortcut to configure RAID controllers based on a RAID response file that you previously created
using the EasyStartup program
If you continue to the main program interface, you will have the following selectable options:
• Compatibility notes: This selection provides information about the RAID controllers, operating systems,
and server configurations supported by that version of the EasyStartup program.
• User Guide: This selection provides information about the features provided by that version of the
EasyStartup program.
• Hardware list: This selection displays a list of hardware devices detected by the EasyStartup program.
• Configure RAID: This selection enables you to view the current RAID configuration for each installed
RAID controller and make changes if needed.
• Install operating system: This selection displays a series of choices and prompts to collect information
required for installation, prepares the hard disk for installation, and then initiates the installation process
using the user-provided operating-system installation CD or DVD.
• About: This selection displays version information and legal notices.
Configuring RAID
The RAID configuration feature that is part of the EasyStartup program enables you to view and change RAID
settings for supported RAID controllers. Through this feature, you have the ability to configure each installed
controller. The program automatically detects the number of discs currently attached to the controller,
determines the possible RAID configurations that can be configured, and prompts you through the steps
to configure one or more disk arrays with or without hot-spare hard disk drives. As you configure each
controller you will be given the option to save the RAID configuration settings to a RAID response file, which
you can use on other similarly configured Lenovo servers. This method satisfies most users' needs.
Typical operating system installation
When you select Install operating system, you will be prompted for information required for the installation.
The prompts vary depending on the operating system selected. This section describes the tasks associated
with a typical Windows operating system installation. Each task must be completed in order before moving
to the next task.
Note: Ensure that your RAID controller is correctly configured before you select an operating system to install.
• Select operating system: This task enables you to select the operating system that you will be installing.
• Select disk: This task enables you to select the disk where you want to install the operating system.
Note: The disk that you select must be set as the boot disk in the Setup Utility program.
• Partitions options: This task enables you to choose whether you want to repartition the selected drive
or use an existing partition.
• Partition settings: This task enables you to choose the file system type and define the partition size.
86 ThinkServer User Guide