Liebert Rack Enclosure With Integrated Water-Based Cooling XDK - Manual (Page 22)

Servicing and Maintenance
18
6.3 Replacing the Heat Exchanger
Figure 12 Heat exchanger replacement
Reinstall the heat exchanger by reversing the reverse order of removal.
NOTE
Regularly check the condensed water drain and clean if necessary
Step 1: Lift the air
duct off the flange
to remove it.
Step 2:
Remove
the grounding
cable
Step 5: Pull
out the heat
exchanger
Step 4: Remove screws
Step 3:
Remove condensate
connection