Power-on self test (post) sequence – Lexmark 4098-001 User Manual

Page 16

Advertising
background image

2-4

Service Manual

4098-001

Power-On Self Test (POST) Sequence

Turn the printer on and check for a correct POST operation by
observing the following:

1. The power light come on.

2. The carrier moves to the left to wipe the printheads.

3. The carrier moves to the right over the maintenance station and

seals the printheads.

4. The paper feed gears turn.

5. All motors stop and the power light stays on.

If your printer completes POST with no errors, go to the

“Symptom

Tables” on page 2-6

, locate the symptom and take the indicated

action.

If your printer does not complete POST, locate the symptom in the

“POST Symptom Table” on page 2-5

and take the indicated

action.

Advertising