Maintenance station service check, Maintenance station, Maintenance station service check,”on – Lexmark 4098-001 User Manual

Page 22

Advertising
background image

2-10

Service Manual

4098-001

Maintenance Station Service Check

The maintenance station has three functions:

1. Wipes the printhead nozzles to clear them of dirt.

2. Provides a place for the printheads to spit all nozzles keeping

them clear prior to printing.

3. Seals the printheads when not in use to prevent the nozzles

from drying.

FRU

Action

1

Maintenance
Station Assembly

As the carrier moves to the right over the
maintenance station, a tab on the bottom of the
carrier engages a tab on the sled of the
maintenance station causing the caps to rise and
seal the printhead. Carrier movement to the left
uncaps the printheads. The wipers clean the
printhead nozzles as the carrier leaves the
maintenance station. The wipers clean the
printheads only when the carrier is moving to the
left. There should be no wiping action of the
printhead nozzles when the carrier is moving to
the right. After the printheads are wiped, a tab on
the carrier engages a tab on the maintenance
station and wipers are lowered. The carrier will
then move to the right over the felt pad where they
will spit all nozzles.

Check the maintenance station for worn or broken
parts.

2

Wipers

Worn wipers cause degraded print quality just after
a printhead maintenance cleaning. Check for loose
or worn wipers.

3

Caps

Worn caps cause the printhead nozzles to dry and
clog. Check for loose or worn caps.

Advertising