Front cover removal, Gear plate assembly removal, Gutter pad / maintenance station removal – Lexmark 4098-001 User Manual

Page 39: Maintenance wipers and caps removal

Advertising
background image

Repair Information

4-5

4098-001

Front Cover Removal

1. Remove rear cover.

2. Disconnect operator panel cable.

3. Insert screwdriver and release two latches located on the

bottom of front cover.

4. Pull the front cover forward and remove.

Gear Plate Assembly Removal

1. Remove all covers.

2. Remove the sheet feeder.

3. Remove the carrier frame.

4. Remove mid frame and star roller assembly.

5. Remove the two gear plate assembly screws from the carrier

frame and remove the gear plate.

Gutter Pad / Maintenance Station Removal

1. Remove all covers.

2. Remove the carrier frame.

3. Depress two plastic latches and remove the maintenance

station.

4. Remove the felt gutter pads.

Maintenance Wipers and Caps Removal

1. Remove all covers.

2. Push the carrier to the left away from the maintenance station.

3. Gently pull the caps and wipers off their mounts.

Advertising