Lakeshore Learning Materials 622 - Manual (Page 2)

Lake Shore Model 620/622/623/647 Magnet Power Supply User’s Manual
A
LIMITED WARRANTY
Lake Shore Cryotronics, Inc. (henceforth Lake Shore), the manufacturer, warrants the instrument to be free
from defects in material and workmanship for a period of twelve months from the date of shipment. During the
warranty period, under authorized return of instruments or component parts to Lake Shore freight prepaid, the
company will repair, or at its option replace, any part found to be defective in material or workmanship, without
charge to the Owner for parts, service labor or associated customary shipping cost. Replacement or repaired
parts will be warranted for only the unexpired portion of the original warranty.
All products are thoroughly tested and calibrated to published specifications prior to shipment. Calibration
Certifications are offered for six month periods only. Where such documentation must be updated, a
re-certification service is offered by Lake Shore at a reasonable cost.
LIMITATION OF WARRANTY
This warranty is limited to Lake Shore products purchased and installed in the United States, or Internationally
through our approved distribution agents. This same protection will extend to any subsequent owner during
the warranty period. It does not apply to damage resulting from improper or inadequate maintenance,
unauthorized modification or misuse, operation outside of the environmental specifications, or from buyer-
supplied software interfacing. It does not apply to damage caused by accident, misuse, fire, flood or Acts of
God, or from failure to properly install, operate, or maintain the product in accordance with the printed
instruction provided.
This warranty is in lieu of any other warranties, expressed or implied, including merchantability or fitness for a
particular purpose, which are expressly excluded. the owner agrees that Lake Shore’s liability with respect to
this product shall be set forth in this warranty, and incidental or consequential damages are expressly
excluded.
CERTIFICATION
Lake Shore certifies that this product has been inspected and tested in accordance with its published
specifications and that this product met its published specifications at the time of shipment. The accuracy and
calibration of this product at the time of shipment are traceable to the United States National Institute of
Standards and Technology (NIST); formerly known as the National Bureau of Standards (NBS), or to a
recognized natural standard.
TRADEMARK ACKNOWLEDGMENT
Many manufacturers and sellers claim designations as trademarks to distinguish their products. Where those
designations appear in this manual and Lake Shore was aware of a trademark claim, they appear with initial
capital letters and a proceeding ™ or
® symbol.
CalCurve™, Carbon-Glass™, Cernox™, Duo-Twist™, Gamma Probe™, Quad-Lead™,
and Quad-Twist™ are trademarks of Lake Shore Cryotronics, Inc.
Kapton ® is a trademark of 3M.
Stycast ® is a trademark of Emerson & Cuming.
Teflon ® is a trademark of DuPont De Nemours.
QuickBasic ® is a trademark of Microsoft Corporation.
Copyright © 1995 – 1999 by Lake Shore Cryotronics, Inc. All rights reserved. No portion of this manual may be
reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical,
photocopying, recording, or otherwise, without the express written permission of Lake Shore.