Lakeshore Learning Materials 622 - Manual (Page 82)

Lake Shore Model 620/622/623/647 Magnet Power Supply User’s Manual
Options & Accessories 6-14
6.5 ACCESSORIES
Accessories are devices that perform a secondary duty as an aid or refinement to the primary unit. Below are
MPS accessories.
MODEL NUMBER DESCRIPTION OF ACCESSORY
106-720 Terminal Block Mate, 18-Contact.
106-726 Detachable Power Connector.
106-730 Terminal Block Mate, 4 contact.
115-010 Detachable 240 VAC Line Cord (Great Britain).
115-011 Detachable 120 VAC Line Cord (USA, Canada).
115-012 Detachable 220 VAC Line Cord (Europe, SA).
2001
RJ-11 Cable Assembly. Four-Wire Cable Assembly with RJ-11 plugs on each end. Used
with RS-232C Interface. Cable is 14 feet (4.6 meters) long. See Figure 5-4.
2002
RJ-11 to DB-25 Adapter. Adapts RJ-11 receptacle to female DB-25 connector. Used to
connect Model 622/623 to Serial Port on rear of Customer’s computer. See Figure 5-5.
2003
RJ-11 to DE-9 Adapter. Adapts RJ-11 receptacle to female DE-9 connector. Used to
connect Model 622/623 to Serial Port on rear of Customer’s computer. See Figure 5-6.
6007 Serial Optical Isolation Link.
8072 IEEE-488 Interface Cable. Cable is 3.4 feet (1 meter) in length.
MAN-623 Model 622/623 User’s Manual.
MST-410
Transverse Probe. Used in electromagnetic fields. This probe is the same as used with the
Lake Shore Model 410 Gaussmeter.
MSA-410
Axial Probe. Used in electromagnetic fields. This probe is the same as used with the Lake
Shore Model 410 Gaussmeter.
MPEC-410-3 Extension Cable. Used with the Model MST-410 and MSA-410 listed above.
HGCT-3020
Hall Sensor, Magnetic Field, Cryogenic, Transverse. This is an individual transverse Hall
sensor meant for use in cryogenic magnet applications. Refer to Paragraph 6.2.1. for
mounting considerations.
HGCA-3020
Hall Sensor, Magnetic Field, Cryogenic, Axial. This is an individual axial Hall sensor
meant for use in cryogenic magnet applications. Refer to Paragraph 6.2.1. for mounting
considerations.
MCT-3160-WN
Probe, Magnetic Field, Cryogenic, Transverse. This is a complete 60 inch long Probe
Assembly using a Model HGCT-3020 Transverse Hall Sensor.
MCA-2560-WN
Probe, Magnetic Field, Cryogenic, Axial. This is a complete 60 inch long Probe Assembly
using a Model HGCA-3020 Axial Hall Sensor.
— Output Cable Set. Output cables are 4 AWG. Each cable is 12 feet (3 meters) long.