Setup (base unit), Ink film – installing / replacing – Panasonic KX-FC175AL User Manual
Page 13
13
Setup (Base Unit)
Ink film – installing / replacing
!
1
Open the front cover by pulling up the centre
part.
Centre part
Front cover
2
Push the back cover open button (green) on
the right side of the unit.
OR
Push the back cover open lever (green)
inside of the unit.
Back cover
open button
(green)
Back cover
open lever (green)
OR
3
Open the back cover.
●
For first time installation of the supplied ink
film, skip to step 6.
Back cover
Install the included ink film or replace the used ink film with a new one.
The following ink films are available for replacement.
Model No. KX-FA53A: Replacement film (1 roll)
Model No. KX-FA55A: Replacement film (2 rolls)
Each roll prints about 140 A4-sized pages or 150 letter-sized pages. See page 10 for accessory
information.
4
For replacement only
Pull out the blue gear and remove the used
ink film. Remove the used core.
Used
ink film
Blue
gear
Used core
(continued)