Panasonic KX-FC175AL - Manual (Page 76)

Feature & Display
Transfer greeting message
(checking, recording or erasing)
TRNS-GREETING
CHECK
[±]
Setting the message transfer
To transfer a recorded incoming
message to another telephone
(p. 68).
MESSAGE TRANS.
MODE=OFF
[±]
See page 68 for details.
#61
CHECK
RECORD
ERASE
Features Summary
76
Advanced features (cont.) !
How to set menu options
Note:
● Step 3 may be slightly different depending on the
feature.
● See page 69 for more details.
1. Press p .
2. Press
(
or
)
until the following is
displayed:
then press w and press ( or )
until the desired feature is displayed.
ADVANCED MODE
PRESS SET
3. Press + or - until the desired setting is
displayed.
4. Press w .
5. Press
p
.
Programming table (cont.)
Code Settings How the unit operates
1. Follow steps 1 and 2 above.
2. Press
+ or - to select “ON”.
3. Press w .
4. Enter the transfer telephone
number.
5. Press w .
6. Press p .
●
This feature can be turned on/off
from a remote location (p. 63).
#60
ON
OFF
(The default setting is in bold type.)
#67
Setting the incoming message
monitor
To hear an incoming message
(ICM) from the speaker when the
answering device is recording the
message.
ICM MONITOR
MODE=ON
[±]
ON
OFF
If you select “OFF”, you cannot
monitor the incoming message.
#58
Setting the original mode
To send or copy a document with
faint or dark writing, set this feature
before starting transmission or
copying.
ORIGINAL
MODE=NORMAL
[±]
NORMAL
LIGHT
DARKER
“NORMAL”: Used for normal
writing.
“LIGHT”: Used for faint writing.
“DARKER”: Used for dark writing.
● This feature will return to the
normal mode after transmission
or copying.