Panasonic KX-FC175AL - Manual (Page 15)

15
Setup (Base Unit)
Recording paper !
1 Fan the stack of paper to prevent a paper
jam.
2 Pull the tension plate forward and hold open
while inserting the paper.
● The paper should not be over the tab.
● If the paper is not inserted correctly,
readjust the paper, or the paper may jam.
Tension plate
Tab
Side to be printed
face down.
Stack of
paper
Correct Incorrect
Adding paper
1. Pull the tension plate forward and hold open while
removing all of the installed paper.
2. Add paper to the stack of paper you removed and
straighten.
3. Fan the stack of paper.
4. Pull the tension plate forward and hold open while
inserting the paper.
Tension plate
A4 size recording paper can be loaded. The unit can hold up to 50 sheets of 60 g /m 2 to 75 g /m 2
(16 lb. to 20 lb.) paper or 30 sheets of 90 g /m 2 (24 lb.) paper.
See the note for paper specifications on page 89.
Tab
Slot
Paper tray
Paper tray !
Insert the tab on the paper tray into the
slot on the back of the unit.
Note:
● Do not place the unit in areas where the
paper tray may be obstructed (i.e. by a
wall, etc.).