Setup (base unit) – Panasonic KX-FC175AL User Manual
Page 14
14
Setup (Base Unit)
Note:
●
The ink film is completely safe to touch, and will not
rub off on your hands like carbon paper.
8
Close the back cover securely by pushing
down on the dotted area at both ends (
#
).
Close the front cover securely (
$
).
●
The following will be displayed while the unit
is checking that there is no slack in the ink
film.
Display:
PLEASE WAIT
Dotted
area
Front cover
Display
Back cover
1
2
5
For replacement only
Remove the stoppers and tags from the new
ink film. Find the “T” shaped gear (blue).
Tags
New ink film
“T” shaped gear (blue)
Stopper
Stopper
6
Insert the blue core of the front ink film roll
into the right slot of the unit (
#
). Insert the
“T” shaped gear (blue) into the left slot of the
unit (
$
).
Insert the rear ink film roll (
%
).
2
3
1
T shaped
gear (blue)
Left
slot
Rear ink film roll
Front ink
film roll
Right
slot
Blue core
T shaped gear (blue)
Ink film
7
Turn the “T” shaped gear (blue) in the
direction of the arrow.
●
Make sure that the ink film is
wrapped around the blue core
at least once.
Slack
Reverse
Tight
Correct
Blue core
The ink film is not wrapped
around the blue core.
Incorrect