Maintenance, Warning, Caution – Polaris 600 EDGE Touring 121 User Manual

Page 119: General maintenance

Advertising
background image

116

MAINTENANCE

General Maintenance

Torque Stop

If your snowmobile is equipped

with an engine torque stop (1),

periodically check torque stop

clearance. With clutches in

proper alignment, the torque stop

clearance should be a minimum

of .010″ to a maximum of .030″

from the engine case (2). Adjust

if necessary, and lock the jam

nut.

Reverse Kit Maintenance

If your snowmobile is equipped with reverse, or if you have a reverse

kit installed, it’s especially important to maintain track tension as

specified on page 120.

WARNING

Improper track tension can cause serious damage to the

snowmobile, which can result in loss of vehicle control and

serious injury or death. Always maintain the track tension as

specified.

Allow the engine to reach idle speed before attempting to shift into or

out of reverse.

CAUTION

Damage will occur to chaincase or transmission if shifting is

attempted before the machine has come to a complete stop.

Make sure the snowmobile has completely stopped and the

engine has returned to idle speed before shifting gears.

2

1

Advertising