Operation, Starting the engine – Polaris 600 EDGE Touring 121 User Manual

Page 68

Advertising
background image

65

OPERATION

Starting the Engine

Starting a Cold Engine (Electric Start)

Do not depress the throttle

until the engine starts.
1. Flip choke toggle to

FULL ON.

2. Pull kill switch (shut-off

switch) up to RUN.

3. Turn key to START and

crank engine.

4. After the engine starts,

release the key to ON

and flip the choke toggle

to OFF. If the engine

slows or wants to stop,

use intermittent choking

to HALF ON.

Starting a Warm Engine

1. Turn key to ON.
2. Pull kill switch (shut-off switch) up to RUN.
3. Grasp starter handle and pull slowly until recoil engages; then pull

to start.

If the engine does not start on the first pull, slightly depress the throttle

with your left hand (no more than 1/4″ open), and pull the rope with

your right hand. When the engine starts, immediately release the

throttle.

CHOKE TOGGLE POSITIONS

Off

Half On

On

or

or

or

Advertising