Polaris 600 EDGE Touring 121 - Manual (Page 45)

42
THE PERFECT FIT
Edge Rear Suspension Adjustments
Weight Transfer During Acceleration
The preferred method for controlling
weight transfer during acceleration of the
EDGE rear suspension is by adjusting the
rear rear scissor stop (RRSS). The RRSS
is located in the best overall trail riding
position when delivered from the factory.
To decrease weight transfer under
acceleration (for improved cornering),
rotate the RRSS to a higher position with
the scissor stop tool (1) located in your tool kit.
To increase weight transfer or ski lift during acceleration, move the
RRSS to the rearward hole on high position. The RRSS may also be
rotated to a lower position for even more weight transfer if desired.
A - Stock Position - This setting is
most desirable for trail riding.
B - Medium or High Position (standard
hole location) - This setting will
decrease weight transfer.
C - Rearward Upper Position (optional
hole location - This setting will
increase weight transfer.
NOTE: Your dealer can help you with
initial set-up and additional
set-up instructions to help
you achieve your optimum
ride.
1
A
B
C