Perle Systems Adaptors - Manual (Page 26)

FAST Serial Adaptors User Guide
Installing under Windows NT
Page 26
Chapter 2 Installing drivers and host cards
Installing under Windows NT
The procedure for installing and configuring host cards, drivers software and associated
utilities for the Windows NT operating system is as follows:
1. Install any PCI host cards and distribution cables or boxes you require into your system.
See Installing host cards and distribution accessories on page 79 .
2. Install any AT cards and distribution cables or boxes you require into your system. See
Installing host cards and distribution accessories on page 79
3. If required, remove any host cards you want from your system. See Removing host
cards on page 103 .
4. Use the PortDirector software to update your system with the revised number and type of
host cards. See The PortDirector user guide part number 5500028 for further details.
Your system can now use the serial adaptor cards you have installed.
Note
The Perle PortDirector software contains drivers for the FAST host cards.
You will need to install the PortDirector for WIndows NT on your system in order to use
the FAST host cards.
See Chapter 5 Adding and deleting host cards in the PortDirector User guide
part number 5500028 for further details.