Perle Systems Adaptors - Manual (Page 52)

FAST Serial Adaptors User Guide
Installing under SCO OpenServer 6
Page 52
Chapter 2 Installing drivers and host cards
Installing under SCO OpenServer 6
This section describes how to install the FAST device driver software under SCO
OpenServer 6.
The SCO OpenServer 5 drivers support any mix of AT-FAST and PCI-FAST cards up to a
maximum of four cards. Each card can contain 4, 8 or 16 high-speed serial ports.
• General installation procedure for SCO OpenServer 6 on page 53
• Installing device drivers and utilities on page 54
• Serial port naming conventions on page 59
• Configuring serial ports on page 60
• Removing drivers and utilities from your system on page 64 .