Perle Systems Adaptors - Manual (Page 75)

FAST Serial Adaptors User Guide
Installing under Solaris
Page 75
Chapter 2 Installing drivers and host cards
General setup procedure for Solaris
The general procedure for installing FAST cards under the SCO UnixWare operating system
is as follows;
1. Install any PCI host cards and distribution cables or boxes you require into your system.
See Installing host cards and distribution accessories on page 79 .
2. Install any AT cards and distribution cables or boxes you require into your system. See
Installing host cards and distribution accessories on page 79 .
3. Install the driver software onto your system using the procedures given in Installing
Solaris drivers on page 76 .
4. You can then enable login access using the procedures given in Enabling logins on
page 77 .
5. If required, remove any host cards you want from your system. See Removing host
cards on page 103 .