Perle Systems Adaptors - Manual (Page 72)

FAST Serial Adaptors User Guide
Installing under SCO UnixWare
Page 72
Chapter 2 Installing drivers and host cards
Removing the SCO UnixWare driver
To remove the driver, the following steps are required:
1. Remove all ' comf'cards as per the steps in page 71 .
2. Log in as root and type:
pkgrm comf
3. Follow the on-screen prompts, or from Admin_Tools/App_Installer (as system owner)
select the comf icon and then select Remove.
4. Reboot the system.
sync
init 6