Panasonic DX-800 - Manual (Page 185)

Relayed Transmission
185
Ne
tw
or
k
Fe
at
ur
e
s
Programming the End Receiving Station into your Auto Dialer
If the Fax Parameter No. 140 (LAN RELAY XMT REQUEST) is set to "Valid", you can enter the Relay
Address (ABBR No.) by the following procedure.
To set a One-Touch/ABBR for Relayed Transmission Request
Setting Up Your Machine for Relayed Transmission
1
1:ONE-TOUCH
2:ABBR NO.
2
Ex:
ONE-TOUCH< >
PRESS ONE-TOUCH
3
Press a One-Touch key (01 - 28).
Ex:
<01>
ENTER EMAIL ADDRESS
4
To change the input mode (between "ENTER EMAIL
ADDRESS" and "ENTER TEL. NO."),
press .
<01>
ENTER TEL. NO.
5
Enter the telephone number (up to 36 digits).
If the Relay and the End Receiving Stations are both in
the same area, omit the Country Code and the Area Code
from the End Receiving Station. The End Receiving
Station is a local telephone number as viewed from the
Relay Station.
<01>
3961111234
❚
6
<01>ENTER NAME
3961111234
7
Enter the station name by using the character keys (up to
15 characters).
Ex:
<01> ROME
❚
3961111234
8
<01> RELAY ADDRESS
❚❚❚
7 2
1
EMAIL
R O M E
Continued on the next page...