Panasonic DX-800 - Manual (Page 227)

Troubleshooting
227
Information Codes
Pr
oblem S
o
lving
412 No data from the transmitting side. Check with the other party. --
414 Polling password does not match. Check the polling password. 139
415 Polling transmission error. Check the polling password. 139
416/417
418/419 Received data has too many errors. Check with the other party. --
420/421 Machine goes to receiving mode, but receives no
command from the transmitting side.
1. Remote side misdial.
2. Check with the other party. --
422/427 Interface is incompatible. Check with the other party. --
430/434 Communication error occurred while receiving. Check with the other party. --
436/490 Received data has too many errors. Check with the other party. --
456 • Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions:
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing received document.
• Unit was requested to relay a document.
1. Print a File List and check the contents.
2. Wait until unit finishes printing. 160
492/493/
494
Communication error occurred while receiving. Check with the other party. --
495 Telephone line disconnected. Check with the other party. --
501/502 Communication error occurred using the internal V.34
Modem.
Check with the other party. --
540/541/
542/543/
544
Communication error occurred while transmitting. 1. Reload the document and send again.
2. Check with the other party. --
550 Telephone line disconnected. Check with the other party. --
552/553/
554/555
Communication error occurred while receiving. Check with the other party. --
580 Sub-address transmission to a unit that has no Sub-
address function. Check the remote station. 207
581 Sub-address Password transmission to a unit that has
no Password Sub-address function. Check the remote station. 207
601 ADF Door was opened during ADF transmission. Close the ADF Door and send again. 232
623 No document loaded on the ADF. Reload the document and send again. --
630 Redial was not successful due to a busy line. Reload the document and send again. --
631 During dialing, STOP was pressed. Reload the document and send again. --
634 Redial was not successful due to no response from
the called station or wrong number dialed.
Note: If busy tone was not detected, the machine will
only redial once.
Check the telephone number and send again. --
638 Power failure occurred during the communication. Check the power cord and plug. 40
711 Incorrect LDAP settings. Check the LDAP Server Name, LDAP Log in
Name, LDAP Password, LDAP Search Base.
712 Incorrect email address. Check the registered email address.
Check the IP Address of the SMTP Server
with the Network Administrator. --
714 Cannot Log on to the LAN. Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator. --
715 TCP/IP connection timed out. Check the Internet Fax Parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address. --
Info.
Code
Meaning Action Page
Continued on the next page...