Panasonic DX-800 - Manual (Page 83)

Customizing Your Machine
83
Fax Parameter Table
P
rogr
ammi
n
g
Y
our
M
ac
h
ine
143 RELAY XMT REPORT 1 Off Setting how the COMM. Journal for relayed transmission
is sent to the originator.
Off
: Does not send.
Always : Always sends.
Inc. Only : Sends only if communication has failed.
*2 Always
3 Inc. Only
144 EMAIL CHARACTER
SET
1 Japanese Selecting the Character Set when receiving or sending
email text.
*2 English
145 SENDER SELECTION *1 Invalid Selecting a pre-programmed sender’s name and email
address before each transmission.
2 Valid
146 POP TIMER ---- 0 to 60 min. Setting the time interval for the machine to check for email
on the POP Server.
(0 = Does not check the POP Server for email.)
3
147 AUTO POP RCV 1 Invalid Selecting whether the machine automatically downloads
an email from the POP Server.
*2 Valid
148 DELETE POP RCV
EMAIL
1 Invalid Selecting whether the email will be deleted automatically
after retrieval from the POP Server.
*2 Valid
149 DELETE POP ERR
EMAIL
*1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
150 IFAX RETURN
RECEIPT
1 Invalid Selecting whether to send a return receipt when receiving
from another Panasonic Internet Fax.
*2 Valid
151 EMAIL HEADER
FORMAT
1 All Selecting the header information to print when an email is
received. (Normally used for Troubleshooting. It shows
the path of the email transmission before arriving at your
machine.)
*2 Subject/
From/To
3 Off
152 SUB-ADDRESS
ROUTING
*1 Invalid Selecting whether to automatically route a received fax or
email using ITU-T Sub-address.
2 Valid
153 TSI ROUTING *1 Invalid Selecting whether to route a received fax to a telephone
number or an email address preprogrammed in Phone
Book using the originating fax’s Numeric ID (TSI frame
information).
2 Valid
154 ROUTING HEADER
FORMAT
*1 Originator Selecting the type of email header to be included in the
"From" field of each routed faxes.
Originator
: The originating fax machine’s TSI will
appear in the "From" field of the routed
email.
Relay Station : The routing station’s email address will
appear in the "From" field of the routed
email.
2 Relay
Station
155 PRINT ROUTED
DOCUMENT
*1 Inc. Only Selecting whether a received fax to be routed is always
printed or only when the routing operation fails.
2 Always
No. Parameter
Setting
Number
Setting Comments
Continued on the next page...