Panasonic DX-800 - Manual (Page 49)

Setting the Internet Parameters
49
Ins
ta
ll
ing Y
our
Mac
h
in
e Depending on how your machine will be configured to communicate on the LAN, the appropriate
parameters listed in the table below must be stored first. (See pages 16 to 20)
Setting the User Parameters for the LAN Interface
Parameter Comments
1 DATE & TIME Current Date and Time.
2 TIME ZONE
The Time Zone is required as part of the Email header information when sending
Internet faxes.
3 LOGO Up to 25 characters & digits.
4 CHARACTER ID Up to 16 characters & digits.
5 ID NO. Your Fax Telephone Number. (Up to 20 digits)
6 (MAC ADDRESS)
Hardware Address hard-coded into your machine. (If required, can be obtained from
the Fax Parameter List printout, by pressing [FUNCTION] [6] [4] [SET])
7* IP ADDRESS
IP Address assigned to your machine by the Network Administrator or the DHCP
Server.
8* SUBNET MASK Subnet Mask assigned by the Network Administrator or the DHCP Server.
9*
DEFAULT GATEWAY IP
ADDR Default Gateway IP Address assigned by the Network Administrator or the DHCP
Server.
10*
PRIMARY DNS SERVER
IP ADDRESS
IP Address of the primary DNS Server. If the DNS Server is not available, change the
setting of the Fax Parameter No. 161 (DNS SERVER) to "Invalid", then enter the IP
Address instead.
11*
SECONDARY DNS
SERVER IP ADDRESS
IP Address of the secondary DNS Server.
12* EMAIL ADDRESS
The Email Address assigned to your machine for sending and receiving. (Up to 60
characters)
13* SMTP SERVER NAME The name of the SMTP Mail Server. (Up to 60 characters)
14 SMTP SERVER IP ADDR IP Address of the SMTP Mail Server.
15* SMTP AUTH NAME
User name required to login to the SMTP Server before it allow to send email
messages. (Up to 40 characters).
16* SMTP PASSWORD Password assigned to your machine. (Up to 10 characters)
17* POP SERVER NAME The name of the POP Mail Server. (Up to 60 characters).
18* POP SERVER IP ADDR IP Address of the POP Mail Server.
19* POP USER NAME User Name assigned to your machine. (Up to 40 characters)
20 POP PASSWORD Password assigned to your machine. (Up to 10 characters)
21 LDAP SERVER NAME The name of the LDAP Server. (Up to 60 characters)
22 LDAP LOG IN NAME Login Name assigned to your machine. (Up to 40 characters)
23 LDAP PASSWORD Password assigned to your machine. (Up to 10 characters)
24 LDAP SEARCH BASE ID for starting the search in the directory on the LDAP server. (Up to 60 Characters)
25 HOST NAME The Host Name assigned to your machine. (Up to 60 characters)
26 DEFAULT SUBJECT
The default information to be added to the Subject Line for all outgoing Email (up to 40
characters). To manually input this information before transmission, change the Fax
Parameter No. 159 (SUBJECT LINE ENTRY) to "2:Valid".
Continued on the next page...