Panasonic DX-800 - Manual (Page 82)

Customizing Your Machine
82
Fax Parameter Table
044 PASSWORD-RCV *1 Off Setting a 4-digit RCV-Password and selecting whether the
machine performs and checks the RCV-Password of the
transmitting station when receiving. (See page 197)
2 On
046 SELECT RCV *1 Invalid Selecting whether the machine performs selective
reception. (See page 194)
2 Valid
047 REMOTE RECEPTION 1 Invalid Selecting whether or not the machine accepts remote
reception command. (See page 129)
*2 Valid
051 REMOTE
DIAGNOSTIC
*1 Invalid Selecting whether or not the machine accepts to update
the firmware or Remote Diagnostics from the remote
station. Please ask your Panasonic Authorized Dealer for
details.
2 Valid
052 DIAGNOSTIC
PASSWORD
(----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for details.
053 SUB-ADDRESS
PASSWORD
(----) Setting a 20-digit password for secured sub-address
communication.
054 FAX FORWARD *1 Invalid Selecting whether the machine performs Fax Forwarding
to the specified destination. (See page 177)
2 Valid
056 COVER SHEET *1 Off Setting the home position of the Cover Sheet parameter in
the Select Mode. (See page 173)
2 On
058 LANGUAGE *1 A-English Selecting the language to be shown on the display and
reports.
2 C-French
3 Spanish
065 PRINT COLLATION 1 Invalid Selecting whether the machine prints out documents in
sequence. (See page 135)
*2 Valid
082 QUICK MEMORY XMT 1 Invalid Selecting whether the machine performs Quick Memory
Transmission. (See page 108 to 110)
Invalid : Stores all documents into memory first before
dialing the telephone number.
Valid : Starts dialing the telephone number immediately
after storing the first page.
*2 Valid
099 MEMORY SIZE
(Flash Memory) - - Displays the amount of base and optional memory
installed.
(Base Memory + Optional Memory)
140 LAN RELAY XMT
REQUEST
*1 Invalid Selecting whether the machine performs LAN Relay XMT
Request.
2 Valid
142 RELAY XMT
(a.k.a. LAN RELAY
STATION on UF-770i)
1 Invalid Selecting whether the machine accepts and performs G3
relayed transmission. (Relay Station Functions)
*2 Valid
No. Parameter
Setting
Number
Setting Comments