Panasonic DX-800 - Manual (Page 84)

Customizing Your Machine
84
Fax Parameter Table
156 PRINT FORWARDED
DOCUMENT
*1 Inc. Only Selecting whether a memory received fax or email to be
forwarded is always printed or only when forwarding is
incomplete.
2 Always
157 TRANSACTION
JOURNAL
*1 Invalid Selecting whether the machine sends a transaction journal
to the pre-programmed email address.
2 Valid
158 PC REMOTE
UPDATE
*1 Invalid Selecting whether the machine will accept commands from
an email application, to:
(a) Program the Internet Parameters
(b) Program the Auto Dialer
(c) Allow retrieval of the Journal
2 Valid
159 SUBJECT LINE
ENTRY
*1 Invalid Selecting whether the "Subject" line can be programmed
during each transmission.
2 Valid
160 DEFAULT DOMAIN 1 Invalid Selecting whether the machine accepts to insert the
Default Domain when entering Manual Number Dialing.
*2 Valid
161 DNS SERVER 1 Invalid Selecting whether to use the DNS Server for the Internet
communication.
*2 Valid
162 TIFF VIEWER URL 1 None Selecting whether to include the URL Address in the email
message body.
*2 English
3 English+
Japanese
163 ROUTING HEADER *1 Invalid Selecting whether to add the Header Print information of
the Routing Station on the top edge of each routed pages.
2 Valid
164 IFAX XMT HEADER
(Email only)
*1 Included Selecting whether to include the header when sending a
document to an addressee in the same Domain as
specified in the Default Domain parameter. (This is useful
when using the machine to scan documents back to your
PC)
Note: When sending to a Domain other than as specified
in the Default Domain parameter, the header will be
included regardless of the selection.
2 Not Included
169 DHCP CLIENT 1 Invalid Select whether the machine would automatically acquire
the Network Parameters from the DHCP Server. (Such as
IP Address, Subnet Mask, Default Gateway IP Address,
etc.)
Note: If you change the setting of this parameter, the
machine will reboot automaticaly.
*2 Valid
170 SMTP
AUTHENTICATION
(See Note 3)
*1 Invalid Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication with a user name and
password before accepting email. After change the setting
to "Valid", you can enter the user name and password
assigned to your machine by your network administrator.
2 Valid
171 POP BEFORE SMTP
(See Note 3)
*1 Invalid Selecting whether your SMTP Server (Outgoing Mail
Server) requires authentication by first retrieving incoming
email from the POP Server before accepting email.
(Please consult with your network administrator).
2 Valid
No. Parameter
Setting
Number
Setting Comments