Panasonic DX-800 - Manual (Page 79)

Customizing Your Machine
79
P
rogr
ammi
n
g
Y
our
M
ac
h
ine
Fax Parameter Table
No. Parameter
Setting
Number
Setting Comments
001 CONTRAST *1 Normal Setting the home position of the CONTRAST key.
2 Lighter
3 Darker
002 RESOLUTION 1 Standard Setting the home position for the RESOLUTION.
*2 Fine
3 S-Fine
4 Halftone
(Fine)
5 Halftone
(S-Fine)
004 STAMP *1 Off Setting the home position of the STAMP key.
To select the stamp function when document is stored in
memory, see Fax Parameter No. 28.
2 On
005 MEMORY 1 Off Setting the home position for memory transmission/copy
mode. (This setting can be temporarily changed by using
F8-9 (MEMORY XMT))
*2 On
006 DIALING METHOD 1 Pulse Selecting the dialing method.
*2 Tone
007 HEADER PRINT *1 Inside Selecting the printing position of the header.
Inside
: Prints inside of TX copy area.
Outside : Prints outside of TX copy area.
No print : Header is not printed.
2 Outside
3 No print
008 HEADER FORMAT *1 Logo, ID No. Selecting the header format.
2 From To
009 RCV'D TIME PRINT *1 Invalid Selecting whether the machine prints the received date &
time, remote ID, percentage of reduction and page number
on the bottom of each received page.
2 Valid
010 KEY/BUZZER
VOLUME
1 Off Selecting the volume of the Key/Buzzer tone.
*2 Soft
3 Loud
012 COMM. JOURNAL 1 Off Selecting the home position of printout mode for COMM.
Journal Off/Always/INC.
Off
: Does not print
Always : Always prints
Inc. Only : Prints only when communication has failed.
2 Always
*3 Inc. Only
013 AUTO JOURNAL
PRINT
1 Invalid Selecting whether the machine prints the journal
automatically after every 32 transactions.
*2 Valid
Continued on the next page...