Panasonic KX-FC962HK - Manual (Page 24)

4. Telephone
24
4 Telephone Making and Answering Calls
4.1 Making phone calls
4.1.1 With the cordless handset
1 Lift the cordless handset and press {C} or
{s}
.
2 Dial the telephone number.
3 When finished talking, press {ih} or place
the cordless handset on the charger.
Speakerphone operation
L For best performance, please note the
following:
–
Talk into the microphone (
1).
– Use the speakerphone in a quiet
environment.
– Speak alternately with the caller.
– If you or the other party have difficulty
hearing each other, press {e} or {v}
repeatedly to adjust the speaker volume
as necessary.
L While talking using {C}, you can switch to a
speakerphone conversation by pressing {s}.
To switch back, press {C}.
To redial the last number dialled from the
cordless handset
Press {C} or {s}, then press {R}.
To redial automatically
Press {s}, then press {R}.
L If the line is busy, the unit will automatically
redial the number up to 11 times. While the
cordless handset is waiting to redial, {s} will
flash. While the cordless handset is
redialling, mute is automatically turned ON.
Note:
L If mute does not turn OFF after the line is
connected, press {C/T}.
To make a call using the redial list
The last 10 telephone numbers dialled from the
cordless handset are stored in the redial list.
1. Press {R}.
L The last number dialled will be displayed.
2. Press {e} or {v} repeatedly to select the
desired number.
L To exit the list, press {ih}.
3. Press {C} or {s}.
L If {s} is pressed, the unit will redial
automatically if the other party’s line is
engaged.
To edit a number in the redial list before
calling it
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
desired number, then press {j/OK}.
3. Select “ Edit and Call”, then press {>}.
4. Press {<} or {>} to move the cursor, then
edit the number.
L Place the cursor on the number you wish
to erase, then press {C/T}.
L Place the cursor to the right of where you
want to insert a number, then make the
correction.
5. Press {C} or {s}.
To erase numbers in the redial list
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
desired number, then press {j/OK}.
3. Select “ Erase”, then press {>}.
L If you want to erase all numbers in the list,
select “
Erase All”, then press {>}.
4. Select “ Yes”, then press {>}.
5. Press {ih}.
To store a number from the redial list into
the cordless handset phonebook
1. Press {R}.
2. Press {e} or {v} repeatedly to select the
desired number, then press {j/OK}.
3. Select “ Add Phonebook”, then press {>}.
4. Enter a name, up to 16 characters (see page
81 for character entry), then press {j/OK}.
5. Edit the phone number if necessary, then
press {j/OK}.
6. Select the desired category (page 35), then
press {>}.
{ih}
{ C/T}
{R}
{j /OK}
{C}
{s}
{<}{>}{e}{v}
1
FC962HK-PFQX2283ZA-en.book Page 24 Thursday, September 15, 2005 4:20 PM