Panasonic KX-FC962HK - Manual (Page 66)

9. Programmable Features
66
“ TAM/FAX” (default): Telephone Answering
Machine/Fax mode (page 49)
“
FAX ONLY”: FAX only mode (page 50)
Code #78: Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2 [±]
If you use an extension telephone in TEL/FAX
mode, select the desired number of times the
extension telephone rings before the unit
answers the call. You can select “
1”, “2”
(default), “ 3”, “4”, “5”, “6”, “7”, “8” or “9”.
See page 48 for details.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “ YES”.
4. Press {SET}.
5. Press {SET} again.
9.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 62 to
page 66.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
9.4.1 Program code and direct
command button
{#}{ 0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 20 for details.
{#}{ 0}{2} Your logo
L Enter your logo using the dial keypad. See
page 21 for details.
{#}{ 0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 23 for details.
{#}{ 0}{4} Sending report
– { 1}: “ ON”
– { 2}: “ OFF”
– { 3}: “ ERROR” (default)
{#}{ 0}{6} FAX ring count
– { 1}: “ 1”
– { 2}: “ 2” (default)
– { 3}: “ 3”
– { 4}: “ 4”
– { 5}: “ 5”
– { 6}: “ 6”
– { 7}: “ 7”
– { 8}: “ 8”
– { 9}: “ 9”
{#}{ 0}{6} TAM ring count
– { 0}: “ AUTO”
– { 2}: “ 2” (default)
– { 3}: “ 3”
FC962HK-PFQX2283ZA-en.book Page 66 Thursday, September 15, 2005 4:20 PM