Panasonic KX-FC962HK - Manual (Page 77)

10. Multi-unit Operation
77
5. Select “ Repeater Mode”, then press {>}.
6. Select “ On” or “Off” (default), then press
{>} .
7. Press {ih}.
Note:
L After turning repeater mode ON/OFF, you will
not be able to make or receive calls for a few
moments.
10.3 Intercom
Intercom calls can be made between cordless
handsets/base unit in the same radio cell, but not
in different radio cells.
10.3.1 Between cordless
handsets
Example: When cordless handset 1 calls
cordless handset 2
1. Cordless handset 1:
Press {INT} and {2} (desired cordless
handset number).
L The cordless handset 2 will ring.
2. Cordless handset 2:
Press {C} or {s} to answer.
3. When finished talking, press {ih}.
10.3.2 Between a cordless
handset and the base unit
Example: When cordless handset 1 calls the
base unit
1. Cordless handset 1:
Press {INT}, then press {0}.
L The base unit will ring.
2. Base unit:
Press {INTERCOM}, {SP-PHONE} or lift the
handset to answer.
{ INTERCOM}
{ SP-PHONE} {B}
{ih}
{C}
{s}
{ INT}
FC962HK-PFQX2283ZA-en.book Page 77 Thursday, September 15, 2005 4:20 PM