Panasonic KX-FC962HK - Manual (Page 58)

8. Answering Machine
58
2. Select “ Answer System”, then press {>}.
3. Select “ Settings”, then press {>}.
4. Select “ Number of Rings”, then press
{>} .
5. Select the desired setting, then press {>}.
6. Press {ih}.
Note:
L You can also program this feature with the
base unit (feature #06 on page 62).
Selecting the caller’s recording time
You can change the maximum message
recording time allotted to each caller, or set the
unit to greet callers but not record messages.
1. Press {j/OK}.
2. Select “ Answer System”, then press {>}.
3. Select “ Settings”, then press {>}.
4. Select “ Recording Time”, then press {>}.
5. Select the desired setting, then press {>}.
6. Press {ih}.
Note:
L You can also program this feature with the
base unit (feature #10 on page 62).
Turning call screening on/off
While a caller is leaving a message, you can
screen the call through the cordless handset
speaker.
1. Press {j/OK}.
2. Select “ Answer System”, then press {>}.
3. Select “ Settings”, then press {>}.
4. Select “ Call Screening”, then press {>}.
5. Select “ On” or “Off”, then press {>}.
6. Press {ih}.
Note:
L You can also program this feature with the
base unit (feature #67 on page 65).
Turning message alert on/off
This feature alerts you when new messages
have been recorded. The base unit beeps slowly
until you have listened to all new messages.
1. Press {j/OK}.
2. Select “ Answer System”, then press {>}.
3. Select “ Settings”, then press {>}.
4. Select “ New Msg. Alert”, then press {>}.
5. Select “ On” or “Off”, then press {>}.
6. Press {ih}.
Note:
L You can also program this feature with the
base unit (feature #42 on page 64).
FC962HK-PFQX2283ZA-en.book Page 58 Thursday, September 15, 2005 4:20 PM