Panasonic KX-FT21HK - Manual (Page 54)

54
Receiving Faxes
Pager call - when your unit receives a fax !
This feature allows your unit to call your pager when your unit receives a fax document.
1 Press .
Display:
2 Press , then .
3 Press .
4 Press or to select “ON”.
● If this feature is not required, select “OFF”.
5 Press .
6 Enter your pager number.
● You can enter a total of 46 digits and/or
pauses.
Example:
1 202 555 1234PPP12345678PPP5555#
NO.=
START/COPY/SET
MODE=ON ▼▲
MODE=OFF ▼▲
START/COPY/SET
FAX PAGER CALL
7 0
SYSTEM SET UP
MENU 7 Press .
8 Press . MENU
SETUP ITEM [ ]
START/COPY/SET
/
MENU
START/COPY/SET
Note:
● Message programming methods may
vary depending on the pager company.
Contact your pager company for details.
Your pager
number
Pauses
Your pager access
code, if required.
Message you want displayed
on your pager when your
unit receives a fax.
When your unit receives
a fax document, it will call
your pager company. Your pager
company will
call your pager.
Pager
company
5555
Pager
A few minutes later, your pager
will display the same message
you entered in step 6.
(For example: 5555).
■ How your unit and pager work