Panasonic Programmable Controllers FP-X Series - Manual (Page 18)

18
FP-X series
FP0 expansion units 
FP0 intelligent units 
FP0 link units 
Product number list
Product name
Connection type
Product number
Specifications
Number of I/O points
Power supply
voltage
Input Output
FP0-E8X
FP0-E8RS
FP0-E8YRS
FP0-E8YT
FP0-E8YP
FP0-E16X
FP0-E16RS
FP0-E16T
FP0-E16P
FP0-E16YT
FP0-E16YP
FP0-E32T
FP0-E32P
FP0-E32RS
MIL connector
Terminal block
Terminal block
MIL connector
MIL connector
MIL connector
Terminal block
MIL connector
MIL connector
MIL connector
MIL connector
MIL connector
MIL connector
Terminal block
Relay output: 2A
Relay output: 2A
Transistor output:
NPN 0.1A
Transistor output:
PNP 0.1A
Relay output: 2A
Transistor output:
NPN 0.1A
Transistor output:
PNP 0.1A
Transistor output:
NPN 0.1A
Transistor output:
PNP 0.1A
Transistor output:
NPN 0.1A
Transistor output:
PNP 0.1A
Relay output: 2A
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC Sink/Source (±common)
24VDC
24VDC
24VDC
24VDC
Input: 8
Input: 4
Output: 4
Output: 8
Output: 8
Output: 8
Input: 16
Input: 8
Output: 8
Input: 8
Output: 8
Input: 8
Output: 8
Output: 16
Output: 16
Input: 16
Output: 16
Input: 16
Output: 16
Input: 16
Output: 16
8
8
8
8
8
16
16
16
16
16
16
32
32
32
FP0 E8 Expansion Unit
FP0 E16 Expansion Unit
FP0 E32 Expansion Unit
Notes: 1) The relay output type expansion units come with a power cable (part number AFP0581). (The transistor output type needs no power cable.)
2) The terminal block type relay output units have 2 terminal blocks (9 pins) made by Phoenix. Use a 2.5mm wide screwdriver.
3) The transistor output units have a press-fit socket for wire-pressed terminal c able and contacts. Use the press-fit tool (part number AXY52000) for wire-pressed terminal cable.
Product name Specifications
FP0 Thermocouple unit 4 channels, K, J, T, R thermocouple, Resolution: 0.1 °C
8 channels, K, J, T, R thermocouple, Resolution: 0.1 °C
<Input specifications> Number of channels: 2 channels
Input range: 0 to 5V, –10 to +10V (Resolution: 1/4000)
0 to 20mA (Resolution: 1/4000)
<Output specifications> Number of channels: 1 channel
Output range: –10 to +10V (Resolution: 1/4000)
0 to 20mA (Resolution: 1/4000)
<Input specifications> Number of channels: 8 channels
Input range: 0 to 5, –10 to +10V (Resolution: 1/4000)
0 to 20mA (Resolution: 1/4000)
<Output specifications> Number of channels: 4 channels
Output range: –10 to +10V (Resolution: 1/4000)
4 to 20mA (Resolution: 1/4000)
6 channels, Pt100, Pt1000, Ni1000, Resolution: 0.1K
Product number
FP0-TC4
FP0-TC8
FP0 A21
FP0-A80
FP0-A04V
FP0-A04I
FP0-RTD6
FP0 RTD Unit
FP0 D/A Converter Unit
FP0 A/D Converter Unit
FP0 Analog I/O unit
Power supply
voltage Product name Specifications Product number
FP0 CC-Link Slave unit*
FP0 I/O Link unit
FP0 PROFIBUS Unit
FP Web-Server Unit
FP0-CCLS
FP0-IOL
FP0-DPS2
FPWEB2
24VDC
24VDC
24VDC
24VDC
This unit is for making the FP0 function as a slave station of the CC-Link.
Only one unit can be connected to the furthest right edge of the FP0 expansion bus.
This is a link unit designed to make the FP0 function as a station to MEWNET-F (remote I/O system).
PROFIBUS DP slave or remote I/O unit
Connect all FP-Series PLCs to the Ethernet
*Note: Accuracy will change if an FP0 thermocouple unit is used at the same time.
For details, please refer to the CC-Link Unit manual.
01/2008