Panasonic Programmable Controllers FP-X Series - Manual (Page 5)

5
Name and function of each part
FP-X series
RS232C tool port
Expansion Unit
(Model: Relay output type AFPX-E16R)
Add-on Cassette
(Model: Analog input cassette AFPX-AD2)
I/O status monitor LED
Connector for expansion unit
Securing hole
Connector for expansion unit
Connector for double-stacked mounting
* Only the communication cassette can be upper.
Input/output terminals or communication signal terminals
Input terminals
Output terminals
* Use the two opposite diagonal holes
for mounting when a communication
cassette is double-stacked.
Control Unit
(Model: Relay output type AFPX-C30R)
I/O status monitor LED
Add-on cassette interface cover
Connector for
add-on cassette
Connector
for battery
Input terminals
Power terminals
Output terminals
RUN/PROG. mode selection switch
Potentiometer
(DC powered type has no service power output)
24V DC service power output terminals
C14: 0.15A
C30, C60: 0.4A
USB communication port (excluding C14R)
Connector for expansion unit
Connector for
expansion unit
01/2008